Description: 1 of the three internal teeth is broken off. Bit is currently bound in collet. DescriptionThe collet-type releasing tap holder is used to provide thread length control on machines that have reversible spindles. The unit can be used for either right- or left-hand taps by switching a lever in the body of the tap holder.The tap holder mounts into a machine turret or a round shank tool holder. TT style tap holder collets are used for accurate holding and centering of taps. To provide a positive drive for the taps, the collets have a square hole in the back to accommodate the square of the top shank and a notch in the back bearing of the collet that fits over a hardened pin in the bottom of a holder. Ten tap holder collets are available to hold taps from a 0 tap size to 1/2" maximum, including 1/16" and 1/8" pipe tap sizes.Shank: .625"Diameter: 15.85mm
Price: 90 USD
Location: Minneapolis, Minnesota
End Time: 2024-12-03T01:34:54.000Z
Shipping Cost: 9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Hardinge
