OBDSTAR DC706 E-CU Tool Full Version By OBD/Bench with P003+ Adapter Bench Cable

Description: Product Description International Buyers - Please Note:If you need to return the item for some reasons, pls contact us via ebay message at the fist time to get the RMA# and return address instead of sending back directly without permission.Thank you! OBDSTAR DC706 E-C/U Tool Full Version Plus P003+ Kit and E-C/U Bench CablesPackage Contains: OBDSTAR DC706 E-C/Tool Full Version and P003+ KIT1. OBDSTAR DC706 E-C/U tool is designed for vehicle E-C/M, TCM and body/other system for E-C/U flasher. It can read E-C/U info, R/W Eeprom/Dflash/Pflash/MAP, reset E-C/U(Virgin), calibrate mileage, read IMMO pincode, E-C/U recovery... Its all by OBD or bench mode and makes E-C/U cloning easy.2. OBDSTAR P003+ KIT supports reading and writing E-C/U eeprom & flash data and caculating IMMO data of BOS-CH ME17XX, MED17XX, EDC17XX & CONTINENTAL PCR2.1 for V.W/for Skoda/for Audi/for Seat, for Bentley, for Peugeot/for Citroen/for DS, for Lamborghini, for Porsche, for Mahindra etc.OBDSTAR DC706 Full Version Highlights: 1. R/W eeprom/dflash/pflash/Map, reset E-C/U(Virgin), calibrate mileage, read IMMO pincode, E-C/U recovery... 2. Support 1310+ EC-M types(Partial functions require P003 adapter.)3. Support 320+ TCM types4. Support 160+ body/other E-C/U types(AIRBAG, BCM, BSI, CEM, DDM/PDM, DIM, EPS, KeyLess(RFHUB/RFHM), KVM, RFA, SAM...)5. Support for V.W DQXXX (TCM) calibrate mileage6. Support motorcycle Delphi MT05, MT05.2, MT05.3 E-C/U clone7. Support motorcycle BRP ME17.8.5 E-C/U clone (works with P003 adapter)8. Support Piaggio series engine E-C/U clone(such as MIU G4 (M4G1))9. Support intelligent search by brand, model, part No., E-C/U manufacturer, MCU controller type10. Support automatic identification 11. Strong help data files12. All by OBD or Bench mode13. Please check OBDSTAR DC706 Full Version Support List14. One Year Free Update Onine15. DC706 E-C/U Tool Full Version supports Indian TATA and Mahindra (Check in V30.41 E-C/M software)16. Support HP, Fiat IAW 9GF/9GV/7GF/10GF, Simos etc E-C/U (Partial functions require P003+ adapter.)Notice: 1. Our Distributor Code: 0086A0022. Not support DQ250 before Year 2008 with the old protocolOBDSTAR DC706 Functions:E-C/U Clone/ All by OBD or BenchE-C/M clone for cars (Bos-ch, Continental, Delphi, Denso, Magneti Marelli, Siemens...)E-C/M clone for motorcycles (Bos-ch, Delphi, EFI...)TCM clone (Ac Delco, Bo-sch, Continental, for Getrag, for GM, for Kefico, for Siemens, for Temic, ZF...)Body/Other clone (for FCA, for FIAT, for FORD, for GM/OPEL, for LAND ROVER/for JAGUAR, for PSA, for SMART, for V-OLVO...)OBDSTAR DC706 Supported E-C/U Manufacturers:ACDELCOALPSATEAUTOLIVBOSCHCONTINENTALDELPHIDENSODENSO DECE1CEFIGETRAGGMJCKEFICOLEARMAGNETI MARELLIMARELLISIEMENSSIMTECTEMICVALEOVISTEONYAZAKIZFOBDSTAR DC706 Supported Brands: CarFor ASTON MARTINFor BMWFor FAWFor FCA(ALFA ROMEO, CHRYSLER, DODGE, FIAT...)For FORD/LINCOLNFor GM/OPELFor HYUNDAI/KIAFor LAND ROVER/JAGUARFor LUXGENFor MASERATIFor MAZDAFor MITSUBISHIFor NISSANFor OPELFor PSAFor SMARTFor SUBARUFor SUZUKIFor V-OLVOFor V.W/For AUDI/For SEAT/For SKODAMotorcycle: Fit For APRILIAFit For BRPFit For CFMOTOFit For DERBIFit For GILERAFit For GUZZIFit For ITALJETFit For PEUGEOTFit For PIAGGIOFit For QJBENELLIFit For VESPAOBDSTAR P003+ KIT Functions:1. Continental PCR 2.1 reading CS, PinCode, MAC valueP003 KIT2. Bos-ch MED17.4.4 reading eeprom , PinCodeP003 KIT3. Bos-ch EDC17C60 reading eeprom , PinCodeP003 KIT4. Bos-ch MD1CS018 reading eeprom, PinCodeP003 KIT5. Bos-ch MED17XX/EDC17XX reading eeprom, flash, CS, PinCode, MAC value6. Bos-ch ME17XX reading & writing eeprom, flash7. T87A, 6HP reading & writing TCM eeprom, flash8. Supports the following models require a higher frequency clock during the decryption process(ME9.0, MED9.1,MED9.6.1, ME9.6.1, MED9.5.10,EDC16C39, EDC16CP35, EDC16C8)OBDSTAR P003+ KIT is required when you read and write 6HP, 9GF, 10GF, Simos etc E-C/Us on bench. E-C/Us that requires P003+ adapter:For ALPINA BOS-CH MEVD17.2.6 TC1797 (BENCH+P003) For AUDI CONTINENTAL SIMOS12.2 TC1797 (BENCH+P003) For AUDI CONTINENTAL SIMOS8.5X TC1796 (BENCH+P003) For AUDI CONTINENTAL SIMOS8.6X TC1796 (BENCH+P003) For BMW BOS-CH MEVD17.2.6 TC1797 (BENCH+P003) For FORD BOS-CH MED17.0 TC1767 (BENCH+P003) For FORD BOS-CH MEDG17.0 TC1797 (BENCH+P003) For GEELY BOS-CH MED17.8.10 HW2 TC1728 (BENCH+P003) For PORSCHE CONTINENTAL SIMOS8.5X TC1796 (BENCH+P003) For SEAT CONTINENTAL SIMOS12.2 TC1797 (BENCH+P003) For GREATWALL BOS-CH MED17.8.10 HW2 TC1728 (BENCH+P003) For VOLKSWAGEN(V.W) CONTINENTAL SIMOS12.2 TC1797 (BENCH+P003) For VOLKSWAGEN(V.W) CONTINENTAL SIMOS8.5X TC1796 (BENCH+P003) For HYUNDAI BOS-CH ME17.9.11.1 TC1766 (BENCH+P003) For V.W/For Audi/For Skoda/For Seat BO-SCH MED17.5 TC1766 (BENCH+P003) For KIA BO-SCH ME17.9.11.1 TC1766 (BENCH+P003) For Audi Bo-sch MED17.1.6 TC1797 (Bench +P003)For Audi Bo-sch MED17.5.2 TC1767 (Bench +P003)For Bentley Bo-sch MED17.1.6 TC1797 (Bench +P003)For Porsche Bo-sch MED17.1.6 TC1797 (Bench +P003)For Seat Bo-sch MED17.1.6 TC1797 (Bench +P003)For Seat Bo-sch MED17.5.2 TC1767 (Bench +P003)For Skoda Bo-sch MED17.5.2 TC1767 (Bench +P003)For Skoda Bo-sch MED17.1.6 TC1797 (Bench +P003)For V.W Bos-ch MED17.5.2 TC1767 (Bench +P003)For V.W Bos-ch MED17.1.6 TC1797 (Bench +P003)For Audi/For V.W/For Seat Bo-sch MED17.5.1 TC1796 (Bench +P003)For Fiat Magneti Merelli IAW 7GF Kline MPC5534+95640 (Bench +P003)For Fiat/Lanica Magneti Merelli IAW 9GF CAN MPC5642+95640 (Bench +P003)For Ford Magneti Merelli IAW 9GF CAN MPC5642+95640 (Bench +P003)For Hyundai/For Kia Bos-ch ME17.9.11 TC7966 (Bench +P003)For Jeep Magneti Merelli IAW 9GF CAN MPC5642+95640 (Bench +P003)For Jeep/ For Fiat/For V.W Magneti Merelli IAW 10GF CAN MPC5642+95640 (Bench +P003)For Fiat Magneti Merelli IAW 7GF CAN MPC5534+95640 (Bench +P003)For V.W Magneti Merelli IAW 9GF CAN MPC5634+95320(Bench +P003)Function Display:1) Main Page/Brand Supported 2) E-C-M Clone for Cars 3) E-C-M Clone for Motorcycles 4) T-CM Clone 5) Body/Other Clone OBDSTAR P003+ Adapter with EC/U Bench CablesFor reading BOSCH EC/U data, CS, PIN code etc., including For Audi, For Citroen, For DS, For Mahindra, For Peugeot, For Skoda, For SEAT, For Vol-kswagen etc.Attention:There are two layers in the DC706 package box, please check the second layer for adapters.How to connect the P003+ adapter and E/CU BENCH cables with OBDSTAR tablet devices?1. Diag cable OBD connector(male)2. Connect P003 connector(female)3. P003 adapter4. Boot jumper(spring needle)5. Boot jumper(welding)6. EC/U pin connector7. EC/U boot connector8. 12V powerBench Mode:Step 1: Connect 1, 2, 3 together as pic below;Step2: connect the EC/U pin connector to the EC/U according to the wiring diagram;Step3: connect 12V power with diagnostic device;Step4: read dataBoot Mode:Step 1: Connect 1, 2, 3 together as pic below;Step2: connect the EC/U pin connector to the EC/U according to the wiring diagram;Step3: connect 7 with 4 or 5 and connect it to EC/U;Step4: connect 12V power with diagnostic device;Step5: read data on diagnostic device.SpecificationsOperation systemAndroid 5.1.1CPURK3128 quad-core ARM cortex A7Battery3700mA, rechargeable polymer lithium batteryExtension memory card32G micro SD (TF) card supportedStorage capacity16GBLCD7.0 inchLCD resolution1024*600Touch screenCapacitive touch screenWifiSupportedWorking temperature-20℃~55℃ (14℉~131℉)Storage temperature-20℃~70℃ (-4℉~158℉)WeightAbout 0.766kgDimension243mm*148mm*36mmPackage Includes:1pc x DC706 Main Unit1pc x main cable1pc x P004 adapter1pc x P004 E/CU clone jumper1pc x 12V2A charger1pc x P003+ adapter1pc x EC/U BENCH jumper5pcs x 120 ohm resistors1pc x Boot jumper(spring needle)1pc x Boot jumper(welding) Please Note Warranty Feedback Payment Contact US If you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you! 1. Most of our items have 3 years warranty.2. All our items have been tested good before shipping.3. We provide buyer return and refund service. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Buyer pay the shipping cost. If you are satisfied with our items and service, Your positive feedback with good full stars to the 5 DSRs will be much appreciated.If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.Since Neutral or Negative feedback wont solve any question. We will do our best to solve the problem for you as soon as possible. 1.We only accept paypal. 2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay. So please contact us timely before we take this action.Thanks! 3.We dont responsible for any custom duty or import cost. 4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom declaration which is suitable for most countries accordingly. If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.Sorry for delay reply on weekend. Welcome to visit my store carobdtool88 Please Note If you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you! Warranty 1. Most of our items have 3 years warranty.2. All our items have been tested good before shipping.3. We provide buyer return and refund service. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Buyer pay the shipping cost. Feedback If you are satisfied with our items and service, Your positive feedback with good full stars to the 5 DSRs will be much appreciated.If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.Since Neutral or Negative feedback wont solve any question. We will do our best to solve the problem for you as soon as possible. Payment 1.We only accept paypal. 2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay. So please contact us timely before we take this action.Thanks! 3.We dont responsible for any custom duty or import cost. 4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom declaration which is suitable for most countries accordingly. Contact US If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.Sorry for delay reply on weekend. Welcome to visit my store carobdtool88 powered by

Price: 1370 USD

Location: Perth Amboy, New Jersey

End Time: 2024-11-07T03:36:49.000Z

Shipping Cost: 0 USD