PHOENIX CONTACT Power Supply 2904374 UNO-PS/1AC/5DC/25W 5V DC FACTORY SEALED NEW

Description: Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/25 W UNO POWER power supplies with basic functionalityThanks to their high power density, compact UNO POWER power supplies are the ideal solution for loads up to 240 W, particularly in compact control boxes. The power supply units are available in various performance classes and overall widths. Their high degree of efficiency and low idling losses ensure a high level of energy efficiency. Your advantagesFlexible mounting by simply snapping onto the DIN railMore space in the control cabinet with up to 20 % higher power densityMaximum energy efficiency, thanks to over 90 % efficiency and extremely low idling losses under 0.3 WOutdoor installation, thanks to the wide temperature range from -25°C to +70°CAC operationNominal input voltage range100 V AC ... 240 V ACInput voltage range85 V AC ... 264 V ACInput voltage range AC85 V AC ... 264 V ACVoltage type of supply voltageACInrush current< 30 A (typ.)Inrush current integral (I2t)< 0.5 A2s (typ.)Frequency range (fN)50 Hz ... 60 Hz ±10 %Mains buffering time> 35 ms (120 V AC)> 135 ms (230 V AC)Current consumptiontyp. 0.53 A (100 V AC)typ. 0.28 A (240 V AC)Nominal power consumption61.7 VAProtective circuitTransient surge protection; VaristorPower factor (cos phi)0.47Typical response time< 1 sInput fuse2 A (slow-blow, internal)Permissible backup fuseB6 B10 B16Recommended breaker for input protection Efficiencytyp. 85 % (120 V AC)typ. 86 % (230 V AC)Output characteristicHICCUPNominal output voltage5 V DC ±1 %Nominal output current (IN)5 A (-25 °C ... 55 °C)Derating55 °C ... 70 °C (2.5%/K)Feedback voltage resistance< 10 V DCProtection against overvoltage at the output (OVP)≤ 10 V DCControl deviation< 1 % (change in load, static 10 % ... 90 %)< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)< 0.1 % (change in input voltage ±10 %)Residual ripple< 40 mVPP (with nominal values)Short-circuit-proofyesOutput power25 WMaximum no-load power dissipation< 0.3 WPower loss nominal load max.< 4.5 WRise time< 0.5 s (UOUT (10 % ... 90 %))Response time< 2 msConnection in parallelyes, for redundancy and increased capacityConnection in seriesyesConnection dataInputConnection methodScrew connectionConductor cross section solid min.0.2 mm²Conductor cross section solid max.2.5 mm²Conductor cross section flexible min.0.2 mm²Conductor cross section flexible max.2.5 mm²Single conductor/flexible terminal point with ferrule with plastic sleeve, min.0.2 mm²Single conductor/flexible terminal point with ferrule with plastic sleeve, max.2.5 mm²Single conductor/flexible terminal point with ferrule without plastic sleeve, min.0.2 mm²Single conductor/flexible terminal point with ferrule without plastic sleeve, max.2.5 mm²Conductor cross section AWG min.24Conductor cross section AWG max.14Stripping length8 mmScrew threadM3Tightening torque, min0.5 NmTightening torque max0.6 NmOutputConnection methodScrew connectionConductor cross section solid min.0.2 mm²Conductor cross section solid max.2.5 mm²Conductor cross section flexible min.0.2 mm²Conductor cross section flexible max.2.5 mm²Single conductor/flexible terminal point with ferrule with plastic sleeve, min.0.2 mm²Single conductor/flexible terminal point with ferrule with plastic sleeve, max.2.5 mm²Single conductor/flexible terminal point with ferrule without plastic sleeve, min.0.2 mm²Single conductor/flexible terminal point with ferrule without plastic sleeve, max.2.5 mm²Conductor cross section AWG min.24Conductor cross section AWG max.14Stripping length8 mmScrew threadM3Tightening torque, min0.5 NmTightening torque max0.6 NmLED signalingTypes of signalingLEDElectrical propertiesNumber of phases1.00Insulation voltage input/output4 kV AC (type test)3 kV AC (routine test)Product propertiesProduct typePower supplyProduct familyUNO POWERMTBF (IEC 61709, SN 29500)> 2174000 h (40 °C)Insulation characteristicsProtection classII (in closed control cabinet)Degree of pollution2DimensionsWidth22.5 mmHeight90 mmDepth84 mmInstallation dimensionsInstallation distance right/left0 mm / 0 mmInstallation distance top/bottom30 mm / 30 mmMountingMounting typeDIN rail mountingAssembly instructionsalignable: 0 mm horizontally, 30 mm verticallyMounting positionhorizontal DIN rail NS 35, EN 60715With protective coatingNoMaterial specificationsFlammability rating according to UL 94 (housing / terminal blocks)V0Housing materialPlasticFoot latch materialPOM (Polyoxymethylene)Housing materialPolycarbonateEnvironmental and real-life conditionsAmbient conditionsDegree of protectionIP20Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)Ambient temperature (storage/transport)-40 °C ... 85 °CClimatic class3K22 (in accordance with EN 60721-3-3)Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)15 Hz ... 150 Hz, 2.3g, 90 min.Standards and regulationsStandard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)Standard – Limitation of mains harmonic currentsEN 61000-3-2Standard - Electrical safetyIEC 62368-1 (SELV)Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60204-1 (PELV)Standard - Safe isolationDIN VDE 0100-410Standard - Safety of transformersEN 61558-2-16Approval - requirement of the semiconductor industry with regard to mains voltage dipsEN 61000-4-11Approval dataCSACAN/CSA-C22.2 No. 60950-1-07CSA-C22.2 No. 107.1-01CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)UL approvalsUL/C-UL listed UL 508UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)UL/C-UL Recognized UL 60950-1Conformity/ApprovalsSIL in accordance with IEC 6150806 A ... 16 A (Characteristics B, C, D, K)

Price: 29.99 USD

Location: Los Angeles, California

End Time: 2024-11-20T16:15:08.000Z

Shipping Cost: 0 USD