Spa Sentry

Description: Purpose:SpaGuard's Spa Sentry gives spa owners a one-step liquid additive to avoid pH bounce for up to 1 month per application, simply by adding directly to waterBefore using this product you must first drain and refill your spa and set the desired level of both pH and alkalinity before applyingSpa Sentry also contains a clarifying agent that removes dissolved metals in your water, giving your spa clearer and softer water that will be instantly noticed by bathersKeep your spa water fresh with SpaGuard Spa Sentry!Product Dosage:Calcium Hardness less than 150 ppm32 fl oz per 300 to 500 gallons of waterCalcium Hardness more than 150 ppm64 fl oz per 300 to 500 gallons of waterDirections:First, drain and clean the spas surfaces with SpaGuard Surface Cleaner and clean the filter with SpaGuard Filter Cleaner & DegreaserRefill your spa with fresh water. Important: The heater should be off before the addition of Spa Sentry. The heater should remain off until all cloudiness has been cleared by filtrationAll additions of product should be made with the spa water circulatingIf your fill water has calcium hardness less than 150 ppm (195 ppm total hardness) add1 quart (1 bottle) of Spa Sentry per 300 to 500 gallons of spa waterIf dissolved calcium is present, the water softening action of Spa Sentry will precipitate the calcium, allowing your filter to remove itThe water may cloud when product is added, indicating that Spa Sentry is working to remove excess calciumIf clouding occurs, circulate the spa for 24 hoursThen remove cartridge filters and rinse away excess calcium with strong stream of waterBackwash sand and D.E. filtersIf your fill water has calcium hardness greater than 150 ppm (195 ppm total hardness) a total of 2 quarts of Spa Sentry will be needed for each 300 to 500 gallons of waterAdd the first quart of Spa Sentry and circulate the spa water through the filtration system for 24 hours (use high speed if 2 speed pump)Clean the filters (rinse cartridges or backwash sand or D.E.)Add the second quart of Spa Sentry, and circulate the spa water through the filtration system for 24 hoursClean filter againIf your fill water has calcium hardness greater than 300 ppm (390 ppm total hardness), consult your BioGuard Dealer before using this product

Price: 29 USD

Location: Salem, Oregon

End Time: 2025-01-20T20:46:10.000Z

Shipping Cost: N/A USD