Tuff Stuff Overland Truck Bed Rack For RTT, Adjustable, 51" Length

Description: Just like our 40" bed rack, this 51" RTT truck bed rack is a simple, and economical way to mount your roof tent. Our bed rack is designed to universally install directly on top of any truck bed rail using our provided pinch plates.We offer two Bed Rack sizes40" RTT Bed Rack51" RTT Bed Rack (this rack)Due to this rack being universal (not made for any specific vehicle) we have included custom pinch plates that will pinch the inner lip of your bed rails. This allows the installation to be performed without drilling holes into the bed rails.Our bed rack WILL NOT FIT if there has been a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.Our rack uses a unique sliding center rail which allows the rack to be installed on various widths of beds from full-size Ford F350’s to mid-size Toyota’s.For Toyota's using the factory-installed cargo rail system, our rack will perfectly align with your rail and would require the use of custom T-nuts that can accept 3/8″ diameter bolts. These can be purchased as an add-on.Important:Annex Rooms - Since this rack was designed to be a lightweight, mid-height rack, you will need to be cautious if using an annex room with your tent. Reason, our annex room requires 76"-79" of height to let their luscious locks out properly. So unless you have a lifted truck you better take some measurements before pulling the trigger on this riteous rack.Awnings - You know what a Muffin Top is? That's how your tent will fit on your rack. Your rack will be light and tight within the footprint of your tent so there will not be any room for an awning without modifications.Existing Tonneau - Our bed rack WILL NOT FIT if you have a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.Ford Raptor Bed - 1st generation Ford Raptor beds have no lip to attach the rack, so you will have to use nut inserts, self-drilling screws, or anchors to install the rack on the bed.Dimensions L/W/H: 51 x 48 x 14.5 (max-width is 68 inches)Distance from bar-to-bar: 48 inchesDistance from top of bed rail to top of rack: 14.5"Distance from top of bed rail to bottom of rack: 13"Tube diameter: 1.5" (the center adjustable tube is 1.25")Crossbars: 3 QtyCapacity Static: 800 lbsCapacity Dynamic (Driving down the road): 650 lbs Powder-coated steel for a long-lasting finish and protectionOur rack uses a unique sliding center rail which allows the rack to be installed on various widths of beds from full-size Ford F350’s to mid-size Toyota’s.For Toyota's using the factory-installed cargo rail system, our rack will perfectly align with your rail and would require the use of custom T-nuts that can accept 3/8″ diameter bolts. These can be purchased as an add-on.Important:Annex Rooms - Since this rack was designed to be a lightweight, mid-height rack, you will need to be cautious if using an annex room with your tent. Reason, our annex room requires 76"-79" of height to let their luscious locks out properly. So unless you have a lifted truck you better take some measurements before pulling the trigger on this riteous rack.Awnings - You know what a Muffin Top is? That's how your tent will fit on your rack. Your rack will be light and tight within the footprint of your tent so there will not be any room for an awning without modifications.Existing Tonneau - Our bed rack WILL NOT FIT if you have a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.Ford Raptor Bed - 1st generation Ford Raptor beds have no lip to attach the rack, so you will have to use nut inserts, self-drilling screws, or anchors to install the rack on the bed.

Price: 599.99 USD

Location: Westerville, Ohio

End Time: 2024-11-19T00:26:18.000Z

Shipping Cost: 0 USD