Walnut Blaster Engine Carbon Deposition Cleaner Intake Pipe Valve Clean Machine

Description: AUTOOL HTS 668 Walnut Sand Decarbonizing Machine is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then,the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint. Description:AUTOOL HTS 668 Walnut Sand Decarbonizing Machine is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then,the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint. What is Carbon Deposit？Carbon deposit is the black gel that caused by the repeated high temperature of the engine running, which is the the residual rubber in the fuel injector, the throttle valve, the oil circuit, the spark plug, the cylinder head, the inner wall and other components caused by insufficient combustion of the gasoline in the cylinder. Generally, vehicles need to be cleaned of engine carbon when running for 2 years or driving to 4W kilometers. By removing the throttle,carbon deposit can be seen clearly. Why Need To Decarbonize？1.The vehicle starts to power drop, waste fuel, engine noise and idle speed.2.Difficulty in start, acceleration, engine shake, and excessive exhaust.3.The carbon hard block falls off, which causes the engine to fail to start, or falls into the combustion chamber, causing the combustion chamber wall to wear, eventually damages the engine. What is Walnut Powder(Sand)？1.Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.It show high performance in the three area: hardness, anti-pressure, wear-resisting.2.A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.It was hardly dissolved in acid, alkali and water.3.Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition,it will clean intake pipe and back side of intake valve thoroughly but no damag. How to use? 1.Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover. 2.Join spary gun muzzle and recycle hose together (there is a hole on recycle hose). 3.Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump((not include)) to HTS558. 4.Connect AC power, start clean. The process should last 1-3 minutes(depending on carbon deposition circumstances). 5.Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances). Package Include: 1 PC* AUTOOL HTS558 Main Unit. 2 Pcs* Spray Gun. 1 PC* Goggles. 1 PC* Recycle Hose. 1 PC* Recycle Hose And Spray Gun Connector. Attention please: 1.AUTOOL HTS558 is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150,AUTOOL CT200 or AUTOOL C100. 2.Walnut powder not include in package,please get it in local market3.High pressure air pump is requirement(not include in package).4.Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.

Price: 399.99 USD

Location: Bordentown, New Jersey

End Time: 2023-11-08T15:39:45.000Z

Shipping Cost: 0 USD