Yaesu FT-107M HF Transceiver - (Complete Station Line-up)

Description: Yaesu FT-107M HF Transceiver – (Complete Station Line-up) The classic Yaesu FT-107M Amateur Band HF Transceiver is all solid state and supports LSB, USB, CW, AM, and FSK, operating modes. The equipment offered is a complete radio station line-up, with the optional CW and AM bandwidth filters, memory storage-shift-scan module, and matching ancillary equipment Yaesu produced for this product line. This equipment offering will not be “broken up” for individual equipment sale. This Yaesu FT-107M equipment line-up is single owner-used equipment in near-mint physical condition and is electronically fully functional to manufacturer specifications. There is no rubbed-out or faded panel lettering, unsightly scratches, faded paint, areas with abrasions from usage, missing / broken knobs, missing screws, or damaged cabinet or feet on any of the equipment offered. All the electronic controls, switches, panel metering, status indicators, and illumination lighting function properly. This equipment has been well maintained and operated in a non-smoking environment. The FT-107M transceiver, with internal power supply, was fully re-capped of electrolytic capacitors and given a complete alignment to original manufacture specification 3 years ago.The equipment offered is listed below with the serial numbers provided, where applicable, along with the basic specifications. All equipment will include the original Yaesu operating manuals. The equipment comes with the required interface cables for connection to the FT-107M transceiver for standard operation. As I stated recently in a similar eBay equipment offering, I am downsizing from my current residence and need to “thin out” my ham shack, so I am selling equipment I will have no room to house and utilize in the future. The specific equipment being offered is listed below: Item 1: Yaesu FT-107M Solid State HF Transceiver, SN: 9H-060418: Frequency Coverage: 160 meters 1.8 - 2.0 MHz 80 meters 3.5- 4.0 MHz 40 meters 7.0 - 7.5 MHz 30 meters 10.0 - 10.5 MHz 20 meters 14.0 - 14.5 MHz 17 meters 18.0 - 18.5 MHz 15 meters 21.0 - 21.5 MHz 12 meters 24.5 - 25.0 MHz 10 meters 28.0 - 29.9 MHz - (in 4 Bands: 10A, 10B, 10C, 10D) *** (with the Yaesu FTV-107R Unit, will also operates on ...) 2 Meters 144 - 148 MHz 70 cm 430 - 440 MHz Transmitter: Emissions: LSB, USB, CW, AM, FSK FSK Shift: 170 Hz PA INPUT Power: SSB/CW = 240 watts DC AM / FSK = 80 watts DC Carrier Suppression: Better than 40 dB Unwanted Sideband Suppression: Better than 50 dB - (14 MHz, 1000 Hz Modulation) Transmitter Frequency Response: 350 – 2700 Hz (-6 dB) 3rdOrder Distortion Products: Better than 31 dB down Stability: After 10 minutes warmup: 300 Hz over 30 min, After 30 minutes less than 100 Hz RF Negative Feedback: 6 dB at 14 MHz Modulation Type: SSB: Balanced Modulation. AM: Amplitude Modulation - (of lower power stage) Antenna Input Impedance: 50 ohms for maximum output Receiver: Sensitivity: SSB / CW / FSK: 0.25 µV for S/N 10 dB; AM: 1.0 µV for S/N 10 dB Image Rejection: 1.8 – 14 MHz: Better than 60 dB; 28 MHz: Better than 50 dB IF Rejection: Better than 70 dB Selectivity - (WIDTH at “0”): SSB: 2.4 kHz (-6 dB), 4.0 kHz (-60 dB) ** (Continuously variable from 300 to 2400 Hz) CW: 600 Hz (-6 dB), 1.2 kHz (-60dB) - (optional) < ---------- or --------- > CW: 250 Hz (-6 dB), 500 Hz (-60 dB) - (Installed). AM: 6 kHz (-6 dB), 12 kHz (-60 dB) - (installed). Audio Output Impedance: 4 – 16 Ohms Audio Output Power: 3 watts at 4 ohms at 10% THD Options Installed: Memory Shift - Scan Unit / DMS Module – (Installed) 250 Hz CW Bandwidth Filter – (Installed) 6 kHz AM Bandwidth Filter - (Installed) General: Power Requirements: DC: 13.5 volts, negative ground Power Consumption: Receive 1.5 amps; Transmit 20 amps Case Size: 129 mm (H) x 334 mm (W) x 400 mm (D), * (Including heatsink assembly) Weight: 12.4 kg - (27.4 lbs.) Item 2: Yaesu FV-107 External VFO; SN: 9M-020046(The same variable frequency oscillator and tuning dial mechanism utilized in the FT-107M with the provision for up to 6 crystal selectable fixed frequencies for Net operating, or other similar fixed frequency use. In addition, a clarifier control is provided for TX, RX, or TX/RX with flexible switching between modes of operation with the FT-107M.) Output Frequency: 5.5 – 5.0 MHz Output Levell: 150 mV @ 50 ohms Stability: +/- 300 Hz over 30 min. after 10 min. warmup +/- 100 Hz over 30 min. after 30 min. warmup Fixed Channel: 6 selectable crystal positions – (crystals optional) Clarifier: TX, RX, or TX/RX +/- 2.5 kHz - adjustable Power Requirement: 13.5 VDC, negative ground. (from FT-107M) Size: 129 mm (H) x 216 mm (W) x 330 mm (D) Weight: 2 kg – (4.4 lbs.) Item 3: Yaesu FTV-107R Transverter – (144 & 440 MHz); SN: 9M-020281(A high-performance two-band transverter for Satellite or DX use. Can operate full duplex, with a second receiver, on OSCAR satellite modes A/B/J. Also, an up/down repeater split mode provided allows you to operate on SSB provisioned repeaters) Optional Frequency Modules: 144 – 148 MHz module – (installed) 430 – 440 MHz module – (installed) Output Frequency: 28 – 30 MHz Drive Level: 0.22 V RMS max. Stability: +/- 300 Hz over 30 min. after 10 min. warmup. +/-100 Hz over 30 minutes after 30 min. warmup. Fixed Channels: 6 crystal positions, selectable – (crystals optional) Clarifier: TX, RX, or TX/RX +/- 2.5 kHz adjustment possible Power Requirements: 13.5 VDC. Negative ground – (from FT-107M) Power Source: Interconnecting cable from FT-107M Size: 129 mm (H) x 216 mm (W) x 370 mm (D) Weight: 4.5 kg – (9.92 lbs.) Item 4: Yaesu FC-107 Antenna Coupler; SN: 9K-040445(A compact matching antenna tuner with an inline Wattmeter, SWR meter, and provisions for up to 3 coaxial fed antennas and 1 single wire antenna. In addition, a Pass-Thru switch position will bypass the tuner function and feed the antenna directly to the transceiver which is handy if you utilize a dummy load on one of the antenna positions for testing purposes.) Frequency Coverage: 160 – 10 meters Amateur Bands, plus PASS THRU Input Impedance: 50 – 75 ohms Max. Range of Load Z: 50 ohms in: 12– 200 ohms 75 ohms in: 18– 300 ohms Wire antenna: 18 – 200 ohms Maximum Transmitter Power: 250 watts PEP (at 50 ohms) Power Meter Scales: 25 watts, 250 watts - (selectable) SWR Meter Range: 1:1 to 4:1 Insertion Loss: 0.5 dB Size: 129 mm (H) x 216 mm (W) x 330 mm (D) Weight: 3.4 kg – (7.5 lbs.) Item 5: Yaesu SP-107P External Speaker and Phone Patch; SN: 0C-020198(A matching style case housing a larger external speaker that overrides the FT-107M internal speaker when connected. The internal Phone Patch is designed to work with a standard POTS landline. Auto duplex conversation is not supported, only simplex conversational mode under radio operator transmit/receive control.) Speaker Impedance: 4 ohms Transmitter Mic Impedance: 600 ohms / 50K ohms Receiver Audio Output Impedance: 4 ohms / 600 ohms VU Level Meter: Transmit and Receive Levels Size: 128 mm (H) x 216 mm (W) x 330 mm (D) Weight: 2 kg – (4.4lbs.) Item 6: Yaesu YM-38 Dynamic Desk Stand Microphone; SN: (none) (Matching desk microphone with push button memory shift - scan button controls.) Type: Desk Stand, Dynamic Element Impedance: 600 ohms / 50K ohms – (switchable) Features: - Flexible positioning Mic Neck - Up / Fast / Down – Memory Shift - Scan Buttons Mic. Connector: 8-Pin, Screw-on Connector Item 7: Yaesu YM-35 Dynamic Mobile Hand Microphone; SN: (none)(Hand dynamic microphone, with memory, shift - scan push button controls.) Type: Hand Mobile Mic, Dynamic Element Impedance: 600 ohms Features: - Up / Fast / Down – Memory Shift - Scan Buttons - Front to Back - Noise Cancellation Mic. Connector: 8-pin, Screw-on Connector

Price: 1725 USD

Location: Rochester, Michigan

End Time: 2025-01-26T04:02:04.000Z

Shipping Cost: 200 USD